
Light in the room, water out of the roof — the curb is the job
Skylight Installation in Conroe, TX: New Skylights
A skylight is a hole in the roof with glass in it — and in a high-rain, high-wind, tree-damage market, that hole has to be done right. The curb, the flashing, and the seal are the job; the glass is the easy part. We install new skylights with flashed curbs and sealed penetrations, placed where the roof plane is clear. One thing we will not do: cut a new skylight into a plane with a limb hanging over it. A limb over a skylight is a leak — or a break — waiting for the next storm.
What's included
What Our Skylight Installation Includes
A skylight is a penetration first and a window second. Here is what is included.
Placement Check
The roof plane is checked before anything is cut: no limb overhanging it, no valley below it, and a slope that sheds water past the curb instead of into it.
Curb Construction
A proper curb, built to the skylight and the roof, so the unit sits above the water line and the flashing has something solid to seal to.
Flashing Kit and Sealing
The manufacturer flashing kit is fitted step by step, and the seals are finished so wind-driven rain has nowhere to get in.
Sun-Exposed Planes
Skylights on south-facing and lake-facing planes age faster in reflected sun. We say so before the placement is chosen, and the seal check is more frequent there.
Interior Finish
The light shaft is finished inside so the room gets the light without the draught — and so condensation has somewhere to go.
Service overview
What Skylight Installation in Conroe Really Involves
Skylight installation in Conroe is the cutting of a framed opening, the building of a curb, the fitting of the flashing kit, and the sealing of every joint — in that order. The curb raises the unit above the water line, the flashing sheds water past it, and the seal keeps wind-driven rain out. A skylight set flat on the deck, or flashed with sealant instead of a kit, will leak. It is a question of when, not whether — and when it does, the fix is a roof repair, not a new skylight.
The Conroe risk is the penetration itself. Summer heat dries and shrinks caulk around skylight seals, wind-driven rain tests the curb in every storm, and a limb over the plane is a strike waiting to happen. Lakeside and south-facing skylights age faster — the reflected sun off the water and the direct sun on the plane work the seals harder, so those are checked more often. A skylight is also a decision about the roof around it: a plane under heavy pines, such as a home in River Plantation or Teaswood, is a worse place for a new skylight than an open plane in Grand Central Park — and if a limb hangs over the plane, we decline the cut and say why.
The service timeline
How Our Skylight Installation Process Runs
Check the plane, build the curb, flash it, seal it — in that order.
Inspection
We walk the roof plane and the room below it, check the framing, and confirm there is no limb overhanging the plane and no valley below it.
Written Scope
The skylight, the curb, the flashing kit, and the interior finish are priced line by line. If the plane is wrong for a skylight, we say so and explain why.
Opening and Curb
The opening is cut and framed, and the curb is built to the skylight and the roof, so the unit sits above the water line.
Flashing and Sealing
The manufacturer flashing kit is fitted step by step, and the seals are finished so wind-driven rain has nowhere to get in.
Check and Walk-Through
The finished skylight is checked with water where it can be checked, photographed, and walked through with you — including what to watch at the seals.
Tools methods
Tools and Methods We Use on Skylights
Carpentry, flashing, and sealing — in that order.
Reciprocating saw and framing tools
Cuts and frames the opening so the curb sits square and the unit sits above the water line.
Tin snips and metal brake
Forms the curb flashing and step flashing to fit the roof and the unit.
Caulk gun and sealant
Seals the joints of the flashing kit — used as a finish, never as the flashing itself.
Moisture meter
Checks the deck and the framing around the opening before the skylight goes in.
Level and chalk line
Keeps the curb square and the flashing courses straight, so water sheds past the unit.
Use cases
When Conroe Homeowners Call Us for Skylight Installation
These examples show how the service framework adapts rather than forcing every call through one repair.

Skylight Declined Under a Limb in River Plantation
A plane under a heavy pine, with a limb hanging directly over where the skylight would go. The scope is a refusal — and an explanation: a limb over a skylight is a leak, or a break, waiting for the next storm. The skylight goes on a clear plane, or it does not go in.
Lake-Facing Skylight in April Sound
A south-facing plane on a lake home, where reflected sun will work the seals harder. The scope notes the sun exposure up front, and the seal check is more frequent there — see skylight repair.
Problems we solve
Skylight Problems We Solve for Conroe Homeowners
Most of the skylight installation calls we get in Conroe trace back to one of these problems.
A dark room that needs light
A skylight brings daylight into a room that windows cannot reach. The question is the plane: it has to be clear, it has to shed water, and it has to be flashed properly.
A skylight that will leak
A skylight set flat on the deck, or flashed with sealant instead of a kit, will leak. The curb, the flashing kit, and the seal are the job — the glass is the easy part.
Sun-exposed seals ageing fast
Skylights on south-facing and lake-facing planes age faster in reflected sun. We say so before the placement is chosen, and the seal check is more frequent there.
A limb over the plane
A limb over a skylight is a strike waiting to happen. We decline the cut on a plane with a limb hanging over it — and we say why.
How an estimate works
How Your Skylight Installation Estimate Is Put Together
We do not publish prices — the skylight, the plane, and the interior finish all move the figure. Here is what shapes the estimate.
The skylight and the curb
The unit itself and the curb it sits on — the curb is built to the skylight and the roof, so it is part of the scope, not an extra.
The plane
An open, clear plane is straightforward. A plane that needs framing work, or a roof that needs the opening cut through the deck, takes longer.
The interior finish
The light shaft and the finish inside the room. A skylight is only finished when the room is finished too.
Customer reviews
What Conroe Homeowners Say
Mr. Britt Cartwright and his crew made the investment worthwhile indeed specially knowing that they also have the needed experience working with the solar panel company to get the panels re-installed right the first time!
We were referred to Britt from someone else in our neighborhood. I cannot say enough good things about this company. They delivered an amazing roof and made sure we were happy every step of the way.
Just got a new roof with Squared Up Roofing on June 29, 2024 and I am very pleased! Mr. Britt and his team showed up and showed out. Mr. Britt operates with great Integrity and is a great person as well.
What can you say about a company that actually does what they promise!! Well Squared Up truly is that company. I was pretty nervous about replacing my roof but Britt walked me through the entire process and was there for me every step of the way.
Can a skylight go on any roof?
No. The plane has to be clear — no limb overhanging it, no valley below it — and it has to shed water past the curb instead of into it. If the plane is wrong for a skylight, we say so and explain why. A limb over a skylight is a leak, or a break, waiting for the next storm.
Will a new skylight leak?
A skylight installed with a proper curb, the manufacturer flashing kit, and finished seals does not leak — but it does need its seals checked, especially on sun-exposed planes where summer heat dries and shrinks the caulk. The seal check is part of every inspection.
How long does a skylight installation take?
It depends on the plane, the framing, and the interior finish. The opening, the curb, and the flashing are the roof work; the light shaft and the finish inside are the room work. Your written scope sets out the sequence before work starts.
What is the difference between a skylight and a sun tunnel?
A skylight is a glazed unit set in a curb on the roof, with a light shaft into the room. A sun tunnel is a tube that carries light down from a small roof dome. We install skylights; if you are asking about a sun tunnel, tell us when you call and we will say plainly whether it is work we do.
Ready when you are
Get Your Skylight Installation Estimate in Conroe
One inspection, a written scope, and a straight answer on whether the plane is right for a skylight. Call (936) 693-8377, Monday to Saturday, 8 AM to 8 PM.

Talk with the local team
Request Skylight Installation
Call (936) 693-8377 to book a roof inspection or talk through a skylight. We answer during business hours, Monday to Saturday, 8 AM to 8 PM, and return after-hours calls the next business morning.



